ATX® Power Rack 610 195cm for Low Ceilings

  • Brand: ATX
  • Product Code: ATX-PRX-610
  • Out of stock!


If you have low ceilings you no longer have to compromise on safety and stability! The ATX® PRX 610 Power Rack has been designed to fit into most garages/basements and attics. ✔ 650 kgs Weight Load Rating ✔ Certified for Domestic Use ✔ Extremely Low Ceiling Height - 195 cm ✔ J-Hooks, Spotters and Chin-Up Bar are included with the rack!

Looking for Finance or Lease Options?

Product Specifications

Product Specifications

Footprint Width - 121 cm, Depth - 146 cm, Height - 195 cm. Inside of Cage - 108 cm x 65 cm.
Grade Domestic - EN 20957 I.II.IV - H
Weight 77.5 kgs
Inclusions 1 x ATX® Power Rack 610 195cm (J-Hooks, Spotter System and Chin-Up Bar are included) SOLD Separately - Barbell & Weights.
Weight Load Capacity 650 kgs
Colour Matte Silk Black Powder Coat with White Barcode Markings.
Warranty 5-Year Manufacturer's Warranty
Construction 60 mm x 60 mm x 2 mm Steel with Industrial M12 Hardware & 8 x Reinforcement Plates. 30 x Accessory Adjustment Positions Spaced out every 5 cm. Internal Hole Diameter - 21 mm

There are no downloads available for this product.

Detailed Description

Not everyone has a warehouse-sized garage to dedicate for their gym. If you did fall under a category of people with limited space/clearance you traditionally only had a couple of options: squat stands or pull out the angle grinder and try to give your power cage a hair cut. Both these options are a compromise 

The ATX® PRX 610 Power Cage has been designed for compact spaces in European cities. Just like Europe, Australians living in capital cities are squeezing gyms into smaller and smaller premises. Finally, Aussies can get their hands on a fully-featured power rack that is under 2 metres tall. 

  1. Designed with a load capacity of up to 650 kgs.
  2. 5-Year Manufacturer's Warranty.
  3. Comes standard with multi-grip chin-up bar, j-hooks and spotter bars.
  4. Barcode markings on the uprights for easier identification.
  5. Certified for Domestic Use - EN 20957 I.II.IV - H.
  6. 30 adjustment positions spaced out every 5 cm.
power rack for low ceilings


Everybody marvels at German engineering for high-end products like luxury cars and appliances. However, it is just as ingenious on basic products like the  ATX® Power Rack 610. What might look like a standard design, is some very clever, yet subtle, design elements.

By welding the support brackets on the 60mm x 60mm uprights, it not only makes the rack easier to assemble, but it also adds greatly to its stiffness. High tensile steel nuts and bolts tighten these quality materials up for maximum strength. This rack will perform just like a more expensive one while squeezing in places other racks can't. 

home gym power cage


The J-Hooks are bent into the ideal shape out of 10 mm thick steel plate, making them stronger than you will ever need. The J-Hooks also comes with a 10 mm thick UMHW nylon sleeve. This will reduce noise and save your barbell's knurling/coating.

The Pin-Pipe Spotter System are manufactured out of solid 20 mm thick steel tube. They are sheathed with Ø 38 x 3 mm thick steel casing for extra strength and easier barbell adjustment during exercises like pin press.

Multi-Grip Chin-Up Bar - Four knurled grips with a straight chin-up bar in the back.

compact power cage

Compact Footprint

Probably the most notable feature of the ATX® PRX 610 Power Cage is the significantly reduced height (just 195 cm!). Which makes it suitable for places where height is an issue - attic/garage/basement.

With the cage being 146 cm deep and the ability to wheel your bench inside of the cage, you won't need that much additional space to train compared to some of the Half Racks or even Spotting Stands. The upside is, with the full-sized power cage you won't be compromising on quality and safety.

Despite the compact footprint, you can utilise the majority of attachments and accessories offered for the 600 series power racks. Best of all there is the ATX-LTO-510 Lat Option, which is also designed specifically for the 195cm cage. 

garage gym power rack


ATX® now sports one of the largest range of QUALITY Power Racks. As such you have access to add ons and accessories (sold separately) that you would normally only have available for much more expensive racks. 

power rack attachments

These items are all sold separately.

ATX-LTO-510 - ATX® Lat Option 510 198cm, for all your high and low pulley exercises.

BB-90-CLIP - Resistance Band Pegs.

ATX-J-ARM-LAC - ATX® Jammer Arms - for Various Upper Body Exercises.

ATX-MLIFT-COP - ATX® Monolift - for easier unracking/racking of the barbell.

ATX-WRT-ROL - ATX® Rackable Wrist Rollers - for strengthening your forearms.

This rack comes with j-hooks, spotter arms & chin-up bar. The following items are sold separately: weights, barbell, bench, plus the optional accessories listed above.

Australia Wide Shipping

  We offer the best rates for shipping on bulky products Australia wide, so click here to get a quote. Note: This is valid for individual products only - if in doubt, call us, we have numerous options to help you get the best deal possible.

  We don't ship overseas. Please familiarise yourself with our Shipping Terms and Conditions.

  If you have any other questions just give us a call on 1300 790 432.

Why Choose Sam's Fitness?

An established, local bricks & mortar business
Super-fast delivery, with no inflated shipping costs
Highly skilled & trained customer service staff
Always the lowest prices, so no specials required
We sell quality equipment only, no cheap rubbish
Genuine warranties with ready access to parts

Reviews (0)

Write your own review

Note: HTML is not translated!
    Bad           Good

Tags: ATX-PRX-610, ATX® Power Rack 610 195cm