tracker

ATX® Power Rack 650 218 cm System Plate Loaded

  • Brand: ATX
  • Product Code: ATX-PRX-650-SYS
  • Out of stock!

$1,314.00

AUD
Compact Commercial Power Cage with High and Low Pulley. ✔ 1000 kgs Load Rating ✔ Certified for Commercial Use ✔ 5-Year Manufacturer's Warranty ✔ High Base Weight - 132 kgs ✔ Expandable

Available Options

Looking for Finance or Lease Options?

Product Specifications

Product Specifications

Footprint Width - 121 cm, Depth - 173.5 cm, Height - 218 cm Inner Cage Footprint - 108 cm x 65 cm Uprights - 50 mm hole spacing (centre to centre of the hole), Hole Diameter - 21 mm. Total 33 adjustment Positions.
Weight 132.8 kgs
Inclusions ATX® Power Rack 650 + ATX LTO 520. J-Hooks, Multigrip Chin Up Bar. PLEASE NOTE: Spotters are not included and will have to be purchased separately.
Weight Load Capacity Rack 1000 kg (total) Lat Pulldown - 140 kg
Warranty 5-Year Manufacturer's Warranty
Construction Uprights 60 mm x 60 mm x 3 mm. With reinforcement plates at the top and bottom of the cage.
Weight Plates Used Lat Pulldown - Olympic +51 mm

There are no downloads available for this product.

Detailed Description

Finding a Power Cage which is certified for commercial use and is compact enough to fit into your garage or studio can be quite a difficult task for quite a few reasons. Especially when you attach a lat tower to the back of it

It is a common assumption that if you are looking for a commercial unit, it means that you have space to spare. But that's not the case here in Australia, as everyone is trying to utilize every single inch of their valuable space.

This is where the German engineers saw an opportunity and released the ATX PRX 650. A power cage with notable 60 mm x 60 mm x x 3 mm thick uprights and a genuine 1000 kgs load rating. It also has loads of options, including a high & low pulley.

Have a look at the list of features this rack comes with:

  1. Genuine 1000 kgs weight load rating (total).
  2. Customizable - pick and choose which accessories you need for your training.
  3. Certified for Commercial use- EN 20957 I.II.IV - S.
  4. Compact Footprint - Height: 218 cm Width: 121 cm Depth: 173.5 cm (With LTO 520).
  5. 5-Year Manufacturer's Warranty.
  6. Multigrip Chin Up Bar with Ø 27 mm & Ø 42.5 mm grips for back and grip training.

Compact Commercial Rack

Steel thickness and looks do not give you a commercial certificate. ATX® equipment is tested in an independent German laboratory to ensure the highest quality standards are met to satisfy the strength community in Europe.

The 60 mm x 60 mm x 3 mm thick steel uprights, high-tensile strength M12 hardware and thick reinforcement plates at the top and bottom of the rack, might seem like an overkill for a compact unit. But it would not be the ATX® way if they did not go overboard with their designs. However, that does not mean that these additional features bloat the price of this Power Rack System. 

cpt rack

Choose your Spotters

As standard this Power Cage System comes without spotters, allowing you to choose the best ones to suit your needs:

The ATX® Pin Pipe System - a cost-effective solution to training safely. It is manufactured out of solid 20 mm thick rod and comes with a casing which helps to absorb the shock and reduce noise during training.

The ATX® Flip Down Spotter Emergency Racks - a tad more expensive, but it allows you to change the position of the spotters within seconds.

prx 650 spotters

Choose between THREE Different Lat Tower Options:

ATX LTO 520 - the most simple and efficient lat tower version. It has no mechanical advantage and can withstand loads of up to 140 kgs. The only downside is that it does not have leg lock for heavy lat pulldowns.

ATX LTO 650-PL - A noticeable upgrade from the LTO 520. The weight carriage operates on two solid steel guide rails, providing you with a silky smooth movement. This Lat Tower also comes with a leg lock and rubber footrests for optimum comfort. The safe working load on this station is 160 kgs.

ATX LTO 650-SW - The Stack Weight version operates on the same 20 mm thick guide rails, the only difference is that you are getting 115 kgs weight stack which goes up in 5 kgs increments.

atx rack systems

This rack is ideal for any strength sports enthusiast who is tight on space but still wants the same robustness of a commercial unit. For most, the ATX® PRX 650 Power Cage System would be an overkill. But if you are planning on lifting heavy and want something which would withstand everything you could throw at it, The ATX® Power Rack System 650 is worth looking into.

Exercises

Australia Wide Shipping

  We offer the best rates for shipping on bulky products Australia wide, so click here to get a quote. Note: This is valid for individual products only - if in doubt, call us, we have numerous options to help you get the best deal possible.

  We don't ship overseas. Please familiarise yourself with our Shipping Terms and Conditions.

  If you have any other questions just give us a call on 1300 790 432.

Why Choose Sam's Fitness?

An established, local bricks & mortar business
Super-fast delivery, with no inflated shipping costs
Highly skilled & trained customer service staff
Always the lowest prices, so no specials required
We sell quality equipment only, no cheap rubbish
Genuine warranties with ready access to parts

Reviews (1)

Write your own review

Note: HTML is not translated!
    Bad           Good

Tags: ATX-PRX-650-SYS, ATX® Power Rack 650 218 cm System Plate Loaded