ATX® Wide Grip T Bar Row Handle

ATX®
$165.00
Item No: ATX-TBR-WID-H28

Out of stock

Notify me when back in stock.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

DESCRIPTION

Weight

Weight

The base weight of the item, without any packaging.

21 kg
Dimensions 100 × 25 × 18 cm
Weight

Weight

The base weight of the item, without any packaging.

7kg

Weight Load Capacity

Weight Load

This is the safe working load of the item, not to be confused with a breaking point.

300kg

Inclusions

Inclusions

These are the specific items that you will receive when you purchase the product. Some products are shown with items that are not included for demonstration purposes.

Sold Individually

Warranty

5-Years T&C's

T-bar rows usually let you shift a fair bit of weight, so be prepared for a different feel when you change to a wide grip. With an overall width of 95 cm, the ATX Wide Grip Handle offers another approach to your back training.

Do not load up the bar on your first crack. Start lighter while you get used to the wide-grip movement, then build up a load that suits your training and your equipment.

Key Features:

ATX wide grip T-bar row handle angled product view

95 cm Overall Width

A wide handle for adding variety to your T-bar rows.

Knurled wide row grip close up

Knurled 28 mm Grip

Textured grip surfaces help you hold on through your sets.

Wide row handle fitted beside a red Olympic plate

50 mm Olympic Compatibility

Slides onto conventional Olympic barbell loading sleeves.

Wide row handle reverse front view

300 kg Load Capacity

Rated for loads of up to 300 kg for the complete handle.

Wide row handle reverse angled view with sleeve opening

Solid Metal Construction

A substantial metal handle weighing approximately 7 kg.

Wide row handle front product view

Angled Grip Ends

Bent ends provide the wide hand position for your rows.

Dimensions and Specifications

  • Overall width: 950 mm / 95 cm.
  • Overall height: 215 mm / 21.5 cm.
  • Overall depth: 170 mm / 17 cm.
  • Product weight: approximately 7 kg.
  • Grip diameter: 28 mm.
  • Compatible bar sleeve diameter: 50 mm.
  • Maximum handle load capacity: 300 kg.
  • Construction: solid metal.

Dimensions are overall product measurements. The 95 cm width is not a centre-to-centre grip-spacing measurement. Allow room for the loaded barbell and the rowing movement.

Wide row handle dimension drawing

A Different Feel for Your T-Bar Rows

The wide handle gives you another grip option for your barbell-based rowing setup. The knurled surface and 28 mm diameter provide a straightforward grip without adding rubber sleeves.

Use a suitable barbell hinge or landmine and choose a working load that stays within the limits of the whole setup. The 300 kg handle rating does not increase the permitted load of the barbell, pivot or supporting equipment.

Athlete performing a wide grip row with red plates

Use Your Olympic Barbell and Plates

The handle slides onto a conventional 50 mm Olympic plate-loading sleeve. A compatible landmine or barbell hinge provides the pivoting setup for T-bar rows.

One wide-grip handle is supplied. The barbell, plates, landmine and other supporting equipment shown in the photos are separate items.

Wide row handle fitted to a loaded barbell on the floor

Additional Information

  • Included: 1 x ATX Wide Grip T Bar Row Handle (ATX-TBR-WID-H28). Sold individually.
  • Not included: Barbell, weight plates, bench, landmine, rack or other training equipment shown in the photos.
  • Compatibility: Conventional Olympic barbell sleeves with a 50 mm diameter. No 30 mm or 25 mm compatibility is claimed.
  • Load rating: Up to 300 kg for the complete handle, not 300 kg per hand or grip.
  • Studio use: The supplier describes this as studio-certified equipment.
  • Illustrations: Photos may show optional attachments or equipment that are not included, to illustrate possible configurations or use.

Key Takeaways

  • A 95 cm-wide handle for wide-grip T-bar rows.
  • Knurled 28 mm grip and compatibility with 50 mm Olympic barbell sleeves.
  • 300 kg load capacity for the complete handle.
  • 950 mm wide x 215 mm high x 170 mm deep, weighing approximately 7 kg.
  • One handle supplied; barbell, plates and landmine sold separately.

CUSTOMER REVIEWS

Reviews

There are no reviews yet.

Be the first to review “ATX® Wide Grip T Bar Row Handle”
© 2005 – 2026 Sam's Fitness - Equipment for Life All Rights Reserved.
Your Cart
Your cart is emptyReturn to Shop