The ATX® PRX-750 Power Rack is a genuine commercial power cage with rack extension and weight plate storage.
It comes with a single Chin Up Bar, Flip Down Spotters and 4 sets of weight storage horns!
ATX® Power Rack 750 Deluxe Set Key Features
Construction
- Extremely stable thanks to high base weight of 196.5 kgs (excluding attachments).
- Reinforcement plates at the bottom of the uprights for additional stability improvements.
- 1500 kgs safe working load.
- Free-Standing design with anti-slip feet which can be removed if you want to slide the rack around your gym.
- High-Tensile Strength M20 & M12 (20/12 mm thick) hardware.
- Certified for Commercial Use by European standards – EN 20957 I.II.IV – S.
J-Hooks
The Power Rack comes with a pair of ATX® PRX J-Hooks V 70mm.
Which are manufactured out of 10 mm thick solid steel sheet and feature a 12 mm thick rubber strip for barbell knurling protection.
There are two optional J-Hooks which are compatible with this rack:
ATX® Roller J-Hooks Universal (ATX-FH7-ROL)
ATX® PRX Monolift (ATX-MLIFT-COP)
Six Post Rack
The main difference between the Deluxe Power Cage and the Regular ATX®PRX-750 is the added rack extension enhances the overall stability without an increase in footprint. However the main purpose of the extension is for plate storage. The ATX-WPP-810 & ATX-WPP-220 Weight Plan Pins (optional) can be configured as you desire. It is also worth noting that the rack extension comes with a straight chin-up bar – it serves as the rear cross section. So you can use it as chin up bar. An increase in footprint. However the main purpose of the extension is for plate storage. The ATX-WPP-810 & ATX-WPP-220 Weight Plan Pins (optional) can be configured as you desire. It is also worth noting that the rack extension comes with a straight chin-up bar – it serves as the rear cross section. So you can use it as chin up bar.
Spotters
This power cage comes with Flip Down spotters, but if you prefer other type, you could upgrade them to:
Pin Pipe System ATX-PPS-70 ‐ made out of a solid 20 mm thick steel bar and 6 mm thick rubber sleeve. Rated to 600 kgs
Belt Strap System ATX-STR-X7-70 ‐ Made from 2-ply 70 mm wide nylon strap with thick steel buckles which feature nylon strips for rack paint protection. Rated to 500kg.
Chin Up Bar
The power cage comes with a Single Chin Up Bar ATX-PRX-750-PUL-3 ‐ 27 mm grip diameter. Rated to 160 kgs.
If you prefer other options, the rack is also compatible with these chin up bars:
Multi-Grip Chin Up Bar ATX-PRX-750-PUL-1 ‐ Six different grip positions. With Fat (42mm) and Regular (27mm grip) thickness. Rated to 160 kgs
Indexing Multi-Grip Chin Up BaráATX-PRX-750-PUL-M ‐ eight adjustment positions and five grip variations allow you to have up to 40 different grip positions. The unique design means it will only take you a few seconds to change the grip width. Rated to 160 kgs.
Upright Configuration
This rack is constructed from a 70 mm x 70 mm steel tube with a 3 mm wall thickness.
The rack uses a mix of high tensile industrial-grade M20 and M12 hardware to keep it in place.
Laser Engraved scaling for easier hole identification.
Lat Pulldown
The ATX® PRX Lat Tower Option offers 1:1 ratio. This means that you don’t lose any weight to the mechanical advantage while lifting.
ATX® ditched the tube construction for the guiderails and instead opted for 20 mm thick hard-chrome coated rods. This provides you with stability and silky smooth movement.
125 kgs weight stack which goes up in 5 kgs increments.
Padded knee locks & rubber footrests for optimal comfort during heavy training.
Heavy-duty dual bearing pulleys for even smoother operation.
Weight Storage
As standard, this power cage comes with 4 sets of ATX® Weight Plate Pins (ATX-WPP-810)
#ATXBARBELLCLUB
Reviews
There are no reviews yet.