ATX® Wall Mounted Dip Bars

ATX®
$109.00
Item No: ATX-DBX-710

7 in stock

DESCRIPTION

Weight

Weight

The base weight of the item, without any packaging.

11 kg
Dimensions 65 × 42 × 12 cm
Weight

Weight

The base weight of the item, without any packaging.

10kg

Footprint

Footprint

This is the area occupied by the item itself. You might need to allocate additional space for the use.

71x60x32cm

Certification

EN 20957 I.II.IV – S

Weight Capacity

350 kg

Warranty

5-Years T&C's

The ATX Wall Mounted Dip Bars (ATX-DBX-710) are a great addition to a gym where a suitable wall installation makes sense. The V-shaped handles offer different grip positions for dip training, with 45 mm knurled steel tubes and a supplier-stated grip range of 47-71 cm. The unit has a supplier-listed 350 kg load rating and EN 20957 I.II.IV – S certification for studio use.

Mounting hardware: bolts for assembling the dip-bar unit are included. Fixings for attaching it to the wall are not included. The supplier specifies four wall anchors, chosen to suit the wall construction.

Key Features:

ATX DBX-710 wall-mounted dip bars three-quarter view

350 kg Unit Rating

Supplier-listed capacity for the dip-bar unit, not a guarantee for any wall or fixing system.

V-shaped dip handles viewed from above

V-Shaped Grip Options

The stated 47-71 cm grip range gives you different positions along the angled bars.

Knurled steel dip handle and grip markings

45 mm Knurled Handles

Thick-walled steel grip tubes with knurling and positioning marks.

Dip bars front view with the wall mounting plates

8 mm Flat-Steel Bracing

8 mm flat-steel reinforcement supports the wall-mounted frame.

ATX DBX-710 wall-mounted dip bars three-quarter view

60 cm Wall Stand-Off

The supplier states a 60 cm wall distance; check your individual movement clearance.

Dip bars front view with the wall mounting plates

Four Wall Anchors Specified

Wall fixing hardware must be selected separately to suit the mounting surface.

Dimensions and Grip Geometry

  • Supplier-stated grip range: 47-71 cm.
  • Supplier-stated wall stand-off: 60 cm.
  • Handle diameter: 45 mm.
  • Flat-steel bracing: 8 mm thick.
  • Stated net weight: 10 kg.
  • The illustration also marks a 475 mm rear span. Obtain the actual fixing layout rather than treating this illustration alone as a drilling template.
  • Confirm maximum overall width height and installation clearances before planning a tight space.
Wall dip bar illustration showing the stated grip range and wall stand-off

A Dedicated Wall-Mounted Dip Setup

The angled handles let you choose a grip position to suit your build and technique. The knurled sections and markings help you repeat that position, without making a guarantee that one grip prevents imbalances or reduces joint stress for every user.

Wall mounting keeps the unit off a freestanding base, but the wall and fixing system are part of the installation. Allow room for getting into position and for your chosen movement, including any dip belt or added load.

Choose Your Grip Position

Use the V-shaped arrangement and marked grip sections to find a position that suits the exercise. The published 47-71 cm figure describes the grip range. Confirm its measurement reference and the full outside dimensions if you are planning a restricted space.

The installed handle height depends on the mounting position and must be planned with the model instructions and your clearance requirements in mind.

V-shaped dip handles viewed from above

Wall Fixings and Assembly Hardware

The supplier calls for four wall anchors. Wall-fixing hardware is excluded because the appropriate anchors and matching hardware depend on the wall construction. Bolts that connect the three product parts are a different item and are included.

Use the supplied assembly instructions and obtain suitable advice where needed on the supporting wall and fixing selection. The 350 kg product rating does not establish the capacity of an arbitrary wall, anchor set or installation. No fixing diameter, embedment, torque or hole-centre layout is specified by this listing.

Additional Information

  • Product code: ATX-DBX-710.
  • Certification: EN 20957 I.II.IV – S (Studio), as stated in the supplier datasheet.
  • Load rating: 350 kg for the product as listed. Do not treat it as a separate per-handle rating or 350 kg of added weights plus unrestricted user weight.
  • Grips: thick-walled knurled steel tube with 45 mm diameter.
  • Reinforcement: 8 mm flat-steel bracing.
  • Finish: black. Net weight: 10 kg.
  • Included: one wall-mounted dip-bar unit, supplied in three parts with product-connection bolts and assembly instructions.
  • Packaging: one carton with the unit disassembled.
  • Not included: wall anchors and wall-mounting fixing hardware. Four suitable wall anchors are required according to the supplier.

Key Takeaways

  • Wall-mounted dip unit with a supplier-listed 350 kg rating.
  • 45 mm knurled handles and stated 47-71 cm grip range.
  • 60 cm stated wall stand-off and 8 mm flat-steel reinforcement.
  • Studio class S certification and 10 kg stated net weight.
  • Product-assembly bolts included; wall fixings excluded and selected for the wall.

CUSTOMER REVIEWS

Reviews

There are no reviews yet.

Be the first to review “ATX® Wall Mounted Dip Bars”
© 2005 – 2026 Sam's Fitness - Equipment for Life All Rights Reserved.
Your Cart
Close-up of an ATX® Mobility Roller in black on a white perforated metal rack with numbered holes for alignment, mounted on a swivel bracket.
ATX® Mobility Roller
Product Code:

124002

Price: $49.00
- +
$49.00
SPDLOWPUL Black super econo high pulley
Spud Home Gym Pulley System
Product Code:

125565

Price: $265.00
- +
$265.00
Cable Pulley System
Cable Pulley System (High)
Product Code:

124421

Price: $45.00
- +
$45.00
Black metal pull-up bar with multiple angled grips and mounting brackets, designed for wall installation. The brand ATX is visible on one side. Ideal for different grip positions—consult our Chin Up Buying Guide for expert tips.
ATX® Gladiator Thick Grip Chin Up
Product Code:

124153

Price: $339.00
- +
$339.00