“Gym Chalk for Weightlifting – 8 Blocks” has been added to your cart. View cart

Close-up of a silver ATX® Olympic Power Bar Chrome, featuring a blue label with Power Bar, ATX, 28.5 mm, 20 kg. It has a smooth finish designed for strength training.

Close-up of the ATX® Olympic Power Bar Chrome, featuring a textured grip and smooth metallic weight sleeve with a brass-colored inner ring, highlighting the precision and quality of this fitness equipment.

Three views of the ATX® Olympic Power Bar Chrome: top view shows the whole barbell, middle view focuses on the grip and sleeve, and bottom view details the knurling pattern.

ATX® Olympic Power Bar Chrome

Write a Review

$539.00

Item No: ATX-LH-50-LDC

3 in stock

DESCRIPTION

Weight Weight The base weight of the item, without any packaging.	21 kg
Dimensions	223 × 8 × 8 cm
Grip Diameter	28.5mm
Sleeve Rotation	Bushing
Length	220cm
Sleeve Length	42cm
Coating	Chrome
Load Capacity	700kg
Weight Weight The base weight of the item, without any packaging.	20kg+/-0.2%
Knurl Marking	IPF/IWF
Centre Knurl	None
Knurling Aggression	Medium
Tensile Strength	206K

The ATX® Chrome Power Bar offers world class performance for all levels of users. The ATX bars are crafted from the finest blends of steel and tested to meet strict benchmarks.

Material – special steel according to EN 102775-5.
Coating – Chrome.
Shaft– 28.5 mm in diameter.
Barbell Sleeves – Non-slip ribbing, combined with chrome finish.
Bushings – self lubricating, precision brass bushings.
Weight load capacity – 700 kgs.
Knurling – Medium deep with powerlifting and weightlifting markings.
No centre knurl.

View this post on Instagram

A post shared by Tetzel Halbgottschmied (@halbgottschmiede)

Image of an ATX® Olympic Power Bar Chrome featuring a 2200 mm length, 1310 mm central knurling, 20 kg weight, 28.5 mm diameter, and 206k PSI tensile strength. Includes copper bushing and a 5-year warranty.

ATX® Power Bar Chrome

ATX® Power Bar Chrome is very similar to ATX® Black Mamba Power Bar and the ATX® Power Bar Black, the only difference would be the chrome finish.

The Power Bar is made of very strong and elastic spring steel. It has a massive 206,000 PSI (Tested!) meaning you will need quite a few plates to break it. Barbells under 190,000 PSI tend to bend over time from continuous use, while barbells over 190,000 PSI will remain straight even after years of lifting.

This bar offers dual markings (powerlifting and weightlifting) and no centre knurling. Bars with no central knurling won’t scrape your chest when performing Olympic lifts.

Weight Load Capacity

The weight load capacity varies between exercises due to the relevant load support of the different exercises. Squats are the lowest at 500kg because the load is only supported in the centre of the bar by your shoulders. Conversely, when you bench press your hands are spaced wider than the other lifts. This means there is less strain on the bar.

Regardless these capacities will not be an issue. The person that squats more than 500kgs will no doubt have back wider than the average bench press grip.

Please refer to the table below:

Grip Type	Maximum Permitted Weight	Example of Exercise
Wide Handle Width	700 kg	Bench Press
Medium Handle Width	600 kg	Deadlift
Central/Narrow Handle Width	500 kg	Squats

ATX® offers top-quality, tested equipment for professional use.

The ATX® weight bars are tested in a German independent testing laboratory with the following material tests:

Tensile test acc. To DIN EN ISO 6892-1.
Hardness Rockwell acc. to DIN EN ISO 6508-1

The barbell has the following values: tensile strength (Tensile Strength): 206,000 psi = 206 K (K / NSI = kilo pounds per square inch) = / corresponds to 1420 N / mm2 HRC / surface hardness: 44.0

What’s Included? ATX® Chrome Power Bar (ATX-LH-50-LDC)

Please note the pictures may feature optional attachments or items which are not included with the unit, this is to show the possible configurations/use of the unit.