115kg Weight Stack

The plates go up in 5kg increments and can be changed with the supplied weight stack pin. The style and colour of the weight stack pin may vary – but they all function the same. 

The weight plates feature colour coded weight markings in both pounds and kilograms. If would like to make smaller weight increases you can purchase a pair of ATX Add On Weights. By purchasing a pair you will be able to increase weight by either 1.25kg or 2.5kg. This will also bring the total weight up to 117.5kgs.  

What Machines? 

This weight stack fits ATX machines with 20mm guide rails. Older machines feature 25mm guide rails. Although these weight stacks fit ATX machines, you can also use them on other machines that feature 20mm guide rails and appropriate guide rail spacing.

The other factor to consider when converting from a plate loaded system to a weight stack is the cable. Sometimes the top of the weight stack will vary to where the cable attaches to the plate loaded carriage. This is not the end of the world. We can make up a custom gym cable for you.

Gym Cable Modifcation 

Normally when making a replacement gym cable, we would ask you to measure your existing one and replicate it. In this case you may not be confident working out the extra length. This is not a problem.

We can simply swage a stopper on one end and send the cable with excess length. You can then run the cable and cut it to length. Instead of requiring a swage tool to fit the other end, you can just screw a gym cable end on. You don’t even need to strip the coating off – just tighten the grub screws up.  

You might be thinking that these screw type fittings are flimsy or inferior. We have tested these on our cable and they handle over 350kgs. Plus many high end gym equipment brands also use these types of fittings.