The base weight of the item, without any packaging.
ATX® Flat Bench PRO
$299.00
Item No: ATX-FBX-610
• Pre-order • Ships separately • Cannot be combined with other items
1 available for pre-ordering
DESCRIPTION
Weight Weight |
22 kg |
|---|---|
| Dimensions | 128 × 21 × 41 cm |
| Bench Type | Flat |
Inclusions InclusionsThese are the specific items that you will receive when you purchase the product. Some products are shown with items that are not included for demonstration purposes. |
Sold Individually. |
| Number of Adjustments | 0 |
Bench Height Bench HeightThe height of a bench-press is measured from the floor to the highest point on the device. For adjustable benches, however, this is not measured in an upright (incline) position, rather the height is taken while in a flat position. This allows for a better frame of reference when comparing to other non-adjustable weight benches. |
45cm |
| Back Pad Dimensions | 122x30cm |
| Certification | Commercial |
Weight Load Capacity Weight Load
This is the safe working load of the item, not to be confused with a breaking point.
|
750kg |
Weight WeightThe base weight of the item, without any packaging. |
21.3kg |
| Warranty | 5-Year |
Footprint Footprint
This is the area occupied by the item itself. You might need to allocate additional space for the use.
|
127x60cm |
For the strength orientated facilities, finding the right bench for competition bench pressing can be quite a difficult task. On one hand, you want to keep it cost-effective, on the other hand, you want it to be the exact dimensions as the one you’ll be using in the competitions.
Even if you are not a powerlifting gym, this bench only weighs 21 kg! Perfect if you need a bench that is compact and easily maneuvered. The fact that it is designed to handle burly powerlifters is a bonus.
- IPF specification dimensions – full size backrest pad – 122 cm x 30 cm.
- Lightweight design – weighs only 21 kg!
- Exceptionally stable welded and safety-bolted construction in 70 mm x 70 mm square tube – rated for 750 kg.
- Single front support foot allows for the optimum set up.
- Certified to EN 20957 I.II.IV class S (studio use).
- Compatible with the ATX Fat Pad.
Key Features:
Single Front Foot
The flat single front foot gives maximum foot freedom.
Non-Slip Pad Surface
Durable artificial leather with a leather-grain finish for extra grip.
Rubber Protective Feet
A 60 cm wide cross foot with rubberised feet that are floor-friendly and non-slip.
Heavy Duty Frame
Welded and safety-bolted 70 mm x 70 mm square tube rated for 750 kg.
IPF Spec Pad
A 122 cm x 30 cm pad, about 5.5 cm thick, with dimensions that match IPF specifications.
Light and Compact
Weighs only 21.3 kg and arrives disassembled with assembly instructions.
Dimensions and Footprint
- Length: 127 cm
- Width: 60 cm
- Height: 45 cm
- Pad: 122 cm x 30 cm x about 5.5 cm
- Weight: 21.3 kg
Simple, Efficient and Effective
While this bench looks like something anyone could design, it is actually the result of a design that has evolved over the years. The combination of quality materials and a simple design delivers a bench that is tough whilst being extremely affordable.
Another overlooked factor that contributes to the affordability is that it is flat packed to perfection – Ikea would be proud! With workplace health and safety standards mandating that cartons over 25 kg go on a pallet, the ATX Flat Bench Pro avoids these additional costs.
Most importantly for the gym owner, the simple design means that there are fewer things that can break!
Backrest Pad
It is rare to find a full-sized flat bench built to IPF dimensions, which does not cost an arm and a leg.
The ATX Flat Bench Pro features a 122 cm x 30 cm x 5.5 cm backrest pad. For you heavy benchers out there, when it comes to bench width, bigger is better. Most gym and FID benches have pads that are 25 cm wide. To the layman, 5 cm might not seem like a lot, but this extra width contributes notably to your stability under a heavy barbell.
Even the upholstery has been part of the evolution. The foam is firm and covered in textured artificial leather. The texture will give you more grip compared to traditional smooth finishes.
Optimum Stability
Unlike the other powerlifting lifts, once you have unracked the weight, you are reliant on your gym equipment to complete the lift. If your bench is not stable you simply will not be able to perform to the best of your ability.
Naturally, the 60 cm wide cross foot gives the bench lateral stability. If you are shopping around you will notice that it is wider than a lot of benches. The extra width compensates for the single-leg support at the opposite end. This is essential to allow all bench press feet positions.
Rubberized Feet
There are some high-end benches that do not have rubber feet. What is the big deal you may ask? Well if your gym has concrete floors and you set up and bench with significant leg drive, you might find your bench slipping around when you least expect it.
The feet are made from vulcanised rubber which is the ideal combination of shock absorption and durability for a gym environment.
Additional Information
- Certification: EN 20957 I.II.IV class S (studio).
- Load capacity: 750 kg.
- Frame: 70 mm x 70 mm square tube, welded and safety-bolted.
- Upholstery: Black artificial leather with a leather-grain finish.
- Finish: Black fine-texture powder coat.
- Adjustability: Flat only. There is no backrest or seat adjustment.
- Mobility: No transport wheels.
- Assembly: Delivered disassembled with assembly instructions.
- What is included: ATX Flat Bench PRO (ATX-FBX-610).
Please note The pictures may feature optional attachments or items which are not included with the unit, this is to show the possible configurations and use of the unit.
Key Takeaways
- IPF-spec pad of 122 cm x 30 cm for a stable, full-size bench press setup.
- Welded and safety-bolted 70 mm x 70 mm tube frame rated for 750 kg.
- Class S (studio) certified to EN 20957 I.II.IV.
- A 60 cm cross foot and single front foot for stability with full foot freedom.
- Only 21.3 kg and flat packed, so it is easy to move and cheaper to ship.
RELATED PRODUCTS
CUSTOMER REVIEWS
You must be logged in to post a review.
Reviews
There are no reviews yet.