Sam's FitnessGym EquipmentDiscountedGymFloor RTS 50×50@20mm System
Sale!
Two GymFloor RTS 50x50@20mm System foam mats are stacked; the top is dark gray, the bottom green. Both have a slightly textured surface, ideal for flooring or padding.
The GymFloor RTS 50x50@20mm System showcases a black, textured, square-shaped rubber mat on a white backdrop. It is precisely cut with a mildly rough surface, ideal for flooring or cushioning.
A neatly trimmed GymFloor RTS 50x50@20mm System piece of artificial grass features a lush, vibrant green texture, covering the full area.
Resting on the GymFloor RTS 50x50@20mm System are a black shaker bottle featuring AVA lettering and coiled battle ropes, with a dark towel partially visible in the foreground.
A gym sled with red weights and a harness rests on a green-and-black GymFloor RTS 50x50@20mm System. Red cones are aligned beside the sled, indicating a training path.
A gym features black flooring (GymFloor RTS 50x50@20mm System) with two green turf strips. A bench, wooden exercise ladder, and a rack holding kettlebells and medicine balls are visible in the open, well-lit space.
A close-up of the GymFloor RTS 50x50@20mm System on a white background, featuring a black, textured rubber mat. A ruler measures its thickness, highlighting the mats approximately two-centimeter depth.
A close-up of a metal measuring tape with metric units from 1 to 8 cm, resting on GymFloor RTS 50x50@20mm System artificial green grass.
A close-up image of a ruler on the GymFloor RTS 50x50@20mm System, a textured black granular surface, shows measurements in centimeters with the starting edge aligned to the uneven texture.
Close-up of the GymFloor RTS 50x50@20mm System, featuring its textured black rubber surface and thickness. The mat is shown on a white background, emphasizing its rugged material and slightly rough edges.
Close-up of GymFloor RTS 50x50@20mm System, showing the textured green synthetic turf layer over a black rubber base, highlighting the contrast between the lifelike grass top and sturdy foundation.
Two black, textured foam panels from the GymFloor RTS 50x50@20mm System, labeled RTS-20-ECK-L and RTS-20-ECK-R, form an L-shape with the square left panel larger and the narrower rectangular right panel designed to make a corner.
Close-up of the GymFloor RTS 50x50@20mm System, featuring dark gray interlocking rubber mats with a textured surface. Parts of two tiles are shown at an angle, highlighting the modular design.
Close-up of GymFloor RTS 50x50@20mm System, featuring square black rubber tiles with a textured, granulated surface, arranged on a white background and slightly stacked to display their thickness.
The GymFloor RTS 50x50@20mm System features a square, textured black surface with symmetrically arranged small holes along its edges, made from a rubbery material ideal for protection and anti-slip purposes.
Silver-metal, four-point star brackets from the GymFloor RTS 50x50@20mm System are scattered on a textured gray surface. Nearby, shadows of two small black screws add contrast.
A section of GymFloor RTS 50x50@20mm turf features a central square cutout revealing a white surface. Black connectors and strips are arranged around the opening for assembly or installation.
Two black plastic spider strainer connectors with four prongs and a central oval opening from the GymFloor RTS 50x50@20mm System are displayed. One shows the top view, while the other displays the underside with prongs visible against a white background.
Illustration depicts three wedge-shaped tiles: two black labeled RTS-20-ECK-R/L, 75x30 cm and one gray labeled RTS-20-RAND, 75x30 cm, all part of the GymFloor RTS 50x50@20mm System, with text explaining their tapering thickness.

GymFloor RTS 50×50@20mm System

Write a Review
GymFloor®
Price range: $0.60 through $15.00
Item No: GF-RTS-20-SYSTEM

DESCRIPTION

This product is discounted as it is being discontinued.

Just like building a house starts at the foundation, the perfect gym starts at the flooring. The Original GymFloor® Rubber Tile System allows you to customize your gym flooring to better suit your gym. If you don’t want to do your whole gym floor, they are configurable so you can make them to suit a specific machine. For example a pec dec machine will only require a few.

Since these plates do not require glueing down (they are connected via frog connectors), you can easily expand, redesign your gym to better suit your gym!

Fire Behaviour – EFL (DIN EN 13501-1) / B2 (DIN 4102-1) – normal fire behaviour.

Wear/Abrasion – 0.19% (DIN ISO 9352) – Taber Abrasion Test. (possible slight variances due to various tiles).

Impact Sound Reduction – 14 db (independant test).

Force Reduction – 33.80% – DIN EN 13036-4.

Slip Resistance – R10 (DIN 51130) – Highly Slip Resistant.

A gym features black flooring (GymFloor RTS 50x50@20mm System) with two green turf strips. A bench, wooden exercise ladder, and a rack holding kettlebells and medicine balls are visible in the open, well-lit space.

Features of the Rubber Gym Flooring

  1. Manufactured in EUROPE out of Recycled Rubber.
  2. Exceptionally low odour.
  3. Moisture/Sweat Resistant.
  4. Easy to Lay – use glue/adhesive tape or Frog Connectors.
  5. 3 Years Manufacturers Warranty (excluding normal wear).
  6. Suitable for Indoor and Outdoor use.
  7. Tile Size – 500 mm x 500 mm x 20 mm.
A gym sled with red weights and a harness rests on a green-and-black GymFloor RTS 50x50@20mm System. Red cones are aligned beside the sled, indicating a training path.

Laying Option – for Edges & Corners

Double-Sided adhesive tape. Using glue would void the warranty of the tiles and also could damage the surface of the area. The double-sided tape, would provide optimum grip without any side effects of using glue.

Please Note: Gym Connectors are only compatible with the Base Plate and the Artificial Turf.

Product Information

  1. Footprint – 50 cm +/- 1% x 50 cm +/- 1% x 20 mm +/- 1 mm (will vary depending on the size of the tile)
  2. Grade – Commercial. Fire Behavior – EFL (DIN EN 13501-1) / B2 (DIN 4102-1) – normal fire behavior. Wear/Abrasion – 0.21% (DIN ISO 9352) – Taber Abrasion Test. Impact Sound Reduction – 21 dB (home procedure). Force Reduction – 37.20% – DIN EN 13036-4 Slip Resistance – R10 (DIN 51130) – Highly Slip Resistant.
  3. Weight – ~4.4 kgs. Density – 917 kg/m3 (will vary depending on the size of the tile)
  4. Inclusions – Sold Individually. PLEASE NOTE: frog connectors are sold SEPARATELY.
  5. Color – Black
  6. Warranty – 3 Years Manufacturers Warranty, excluding normal wear and discoloration.
  7. Construction – Recycled rubber granules (SBR) – polyurethane bonded. Manufactured in EUROPE.

RELATED PRODUCTS

  • The ATX® Tactical Weight Vest (Copy) in black features flag patches, weight labels (10 kg, 14 kg, 20 kg), and four colored plates (blue, red, green), displayed on a white background.
    Sale!

    ATX® Tactical Weight Vest Set 18.5 kgs

    Original price was: $665.00.Current price is: $439.00.
    Add to cart
  • The ATX® Suede Power Belt is a black weightlifting belt featuring white stitching and ATX lettering on the side. It includes a buckle and multiple adjustment holes for sizing.

    ATX® Suede Power Belt XX-Large

    $62.00
    Add to cart
  • A rectangular, dark gray foam panel with a slanted edge on one side, shown against a plain white background.

    Shock & Sound Tile 30mm Corner

    $25.00
    Add to cart

CUSTOMER REVIEWS

Reviews

There are no reviews yet.

Be the first to review “GymFloor RTS 50×50@20mm System”
© 2005 – 2025 Sam's Fitness - Equipment for Life All Rights Reserved.
Your Cart
A black fitness squat machine with adjustable bars and a platform. It has various height settings and is designed for strength training exercises.
ATX® Vertical Leg Press
Product Code:

124277

Price: $1,655.00
- +
$1,655.00
A black cable machine with weight stack, pulleys, adjustable handles, and footrests, designed for strength training exercises. The brand ATX is visible on the upright support. The background is plain white.
ATX® Lat Option 650 115 kgs Weight Stack
Product Code:

125831

Price: $1,795.00
- +
$1,795.00
The Wide D Grip Pulldown Bar boasts a sleek chrome finish with two angled handles and a central mounting bracket, reflecting light and offering a minimalistic design ideal for bicycles or similar applications.
Wide D Grip Pulldown Bar
Product Code:

125454

Price: $75.00
- +
$75.00
Z-M10-KNOB replacement knob head
M8 Aluminium Knob
Product Code:

124783

Price: $7.00
- +
$7.00
The 7ft 1500lbs Olympic Bushing Bar is a sleek metal weightlifting accessory with engraved details, featuring dual handles and a circular center. Ideal for strength training or attaching weights, its industrial design appeals to any fitness enthusiast.
ATX® Parallel Grip T Bar Row Handle
Product Code:

124256

Price: $129.00
- +
$129.00
A black cylindrical object with a rounded tip, lying diagonally on a plain white background. The object appears metallic and has a small screw or hole near one end.
Olympic Adapter 50 x 270mm - Small Split
Product Code:

126041

Price: $5.00
- +
$5.00
The ATX® Lever Leather Powerlifting Belt is designed with a black leather exterior, a red interior, and a silver buckle that features the engraved ATX logo.
ATX® Lever Leather Powerlifting Belt XX-Large
Product Code:

124056

Price: $122.00
- +
$122.00
SHIPPING - Checkout has shipping options.
Continue ShoppingCheckout$3,788.00