The base weight of the item, without any packaging.

7 in stock
Weight WeightThe base weight of the item, without any packaging. |
11 kg |
|---|---|
| Dimensions | 65 × 42 × 12 cm |
Weight WeightThe base weight of the item, without any packaging. |
10kg |
Footprint Footprint
This is the area occupied by the item itself. You might need to allocate additional space for the use.
|
71x60x32cm |
| Certification | EN 20957 I.II.IV – S |
| Weight Capacity | 350 kg |
| Warranty | 5-Years T&C's |
The ATX Wall Mounted Dip Bars (ATX-DBX-710) are a great addition to a gym where a suitable wall installation makes sense. The V-shaped handles offer different grip positions for dip training, with 45 mm knurled steel tubes and a supplier-stated grip range of 47-71 cm. The unit has a supplier-listed 350 kg load rating and EN 20957 I.II.IV – S certification for studio use.
Mounting hardware: bolts for assembling the dip-bar unit are included. Fixings for attaching it to the wall are not included. The supplier specifies four wall anchors, chosen to suit the wall construction.

Supplier-listed capacity for the dip-bar unit, not a guarantee for any wall or fixing system.

The stated 47-71 cm grip range gives you different positions along the angled bars.

Thick-walled steel grip tubes with knurling and positioning marks.

8 mm flat-steel reinforcement supports the wall-mounted frame.

The supplier states a 60 cm wall distance; check your individual movement clearance.

Wall fixing hardware must be selected separately to suit the mounting surface.

The angled handles let you choose a grip position to suit your build and technique. The knurled sections and markings help you repeat that position, without making a guarantee that one grip prevents imbalances or reduces joint stress for every user.
Wall mounting keeps the unit off a freestanding base, but the wall and fixing system are part of the installation. Allow room for getting into position and for your chosen movement, including any dip belt or added load.
Use the V-shaped arrangement and marked grip sections to find a position that suits the exercise. The published 47-71 cm figure describes the grip range. Confirm its measurement reference and the full outside dimensions if you are planning a restricted space.
The installed handle height depends on the mounting position and must be planned with the model instructions and your clearance requirements in mind.

The supplier calls for four wall anchors. Wall-fixing hardware is excluded because the appropriate anchors and matching hardware depend on the wall construction. Bolts that connect the three product parts are a different item and are included.
Use the supplied assembly instructions and obtain suitable advice where needed on the supporting wall and fixing selection. The 350 kg product rating does not establish the capacity of an arbitrary wall, anchor set or installation. No fixing diameter, embedment, torque or hole-centre layout is specified by this listing.
You must be logged in to post a review.
Reviews
There are no reviews yet.