ATX® Wall Mounted Dip Bars

ATX®
$109.00
Item No: ATX-DBX-710

7 in stock

DESCRIPTION

Weight

Weight

The base weight of the item, without any packaging.

11 kg
Dimensions 65 × 42 × 12 cm
Weight

Weight

The base weight of the item, without any packaging.

10kg

Footprint

Footprint

This is the area occupied by the item itself. You might need to allocate additional space for the use.

71x60x32cm

Certification

EN 20957 I.II.IV – S

Weight Capacity

350 kg

Warranty

5-Years T&C's

The ATX Wall Mounted Dip Bars (ATX-DBX-710) are a great addition to a gym where a suitable wall installation makes sense. The V-shaped handles offer different grip positions for dip training, with 45 mm knurled steel tubes and a supplier-stated grip range of 47-71 cm. The unit has a supplier-listed 350 kg load rating and EN 20957 I.II.IV – S certification for studio use.

Mounting hardware: bolts for assembling the dip-bar unit are included. Fixings for attaching it to the wall are not included. The supplier specifies four wall anchors, chosen to suit the wall construction.

Key Features:

ATX DBX-710 wall-mounted dip bars three-quarter view

350 kg Unit Rating

Supplier-listed capacity for the dip-bar unit, not a guarantee for any wall or fixing system.

V-shaped dip handles viewed from above

V-Shaped Grip Options

The stated 47-71 cm grip range gives you different positions along the angled bars.

Knurled steel dip handle and grip markings

45 mm Knurled Handles

Thick-walled steel grip tubes with knurling and positioning marks.

Dip bars front view with the wall mounting plates

8 mm Flat-Steel Bracing

8 mm flat-steel reinforcement supports the wall-mounted frame.

ATX DBX-710 wall-mounted dip bars three-quarter view

60 cm Wall Stand-Off

The supplier states a 60 cm wall distance; check your individual movement clearance.

Dip bars front view with the wall mounting plates

Four Wall Anchors Specified

Wall fixing hardware must be selected separately to suit the mounting surface.

Dimensions and Grip Geometry

  • Supplier-stated grip range: 47-71 cm.
  • Supplier-stated wall stand-off: 60 cm.
  • Handle diameter: 45 mm.
  • Flat-steel bracing: 8 mm thick.
  • Stated net weight: 10 kg.
  • The illustration also marks a 475 mm rear span. Obtain the actual fixing layout rather than treating this illustration alone as a drilling template.
  • Confirm maximum overall width height and installation clearances before planning a tight space.
Wall dip bar illustration showing the stated grip range and wall stand-off

A Dedicated Wall-Mounted Dip Setup

The angled handles let you choose a grip position to suit your build and technique. The knurled sections and markings help you repeat that position, without making a guarantee that one grip prevents imbalances or reduces joint stress for every user.

Wall mounting keeps the unit off a freestanding base, but the wall and fixing system are part of the installation. Allow room for getting into position and for your chosen movement, including any dip belt or added load.

Choose Your Grip Position

Use the V-shaped arrangement and marked grip sections to find a position that suits the exercise. The published 47-71 cm figure describes the grip range. Confirm its measurement reference and the full outside dimensions if you are planning a restricted space.

The installed handle height depends on the mounting position and must be planned with the model instructions and your clearance requirements in mind.

V-shaped dip handles viewed from above

Wall Fixings and Assembly Hardware

The supplier calls for four wall anchors. Wall-fixing hardware is excluded because the appropriate anchors and matching hardware depend on the wall construction. Bolts that connect the three product parts are a different item and are included.

Use the supplied assembly instructions and obtain suitable advice where needed on the supporting wall and fixing selection. The 350 kg product rating does not establish the capacity of an arbitrary wall, anchor set or installation. No fixing diameter, embedment, torque or hole-centre layout is specified by this listing.

Additional Information

  • Product code: ATX-DBX-710.
  • Certification: EN 20957 I.II.IV – S (Studio), as stated in the supplier datasheet.
  • Load rating: 350 kg for the product as listed. Do not treat it as a separate per-handle rating or 350 kg of added weights plus unrestricted user weight.
  • Grips: thick-walled knurled steel tube with 45 mm diameter.
  • Reinforcement: 8 mm flat-steel bracing.
  • Finish: black. Net weight: 10 kg.
  • Included: one wall-mounted dip-bar unit, supplied in three parts with product-connection bolts and assembly instructions.
  • Packaging: one carton with the unit disassembled.
  • Not included: wall anchors and wall-mounting fixing hardware. Four suitable wall anchors are required according to the supplier.

Key Takeaways

  • Wall-mounted dip unit with a supplier-listed 350 kg rating.
  • 45 mm knurled handles and stated 47-71 cm grip range.
  • 60 cm stated wall stand-off and 8 mm flat-steel reinforcement.
  • Studio class S certification and 10 kg stated net weight.
  • Product-assembly bolts included; wall fixings excluded and selected for the wall.

CUSTOMER REVIEWS

Reviews

There are no reviews yet.

Be the first to review “ATX® Wall Mounted Dip Bars”
© 2005 – 2026 Sam's Fitness - Equipment for Life All Rights Reserved.
Your Cart
Ironmaster Wall Attachment Organizer, a black steel fitness attachment with multiple padded rollers and a weight plate post, designed for wall mounting.
Ironmaster Wall Attachment Organizer
Product Code:

124329

Price: $49.00
- +
$49.00
Two black hexagonal dumbbells with chrome handles, each labeled “7 KG,” are crossed and resting on a white background.
7kg Rubber Hex Dumbbells (Pair)
Product Code:

125365

Price: $52.50
- +
$52.50
Two black hexagonal dumbbells with silver handles are stacked on top of each other, each marked with “20 KG” on the ends, against a white background.
20kg Rubber Hex Dumbbells (Pair)
Product Code:

125346

Price: $150.00
- +
$150.00
Two black hexagonal dumbbells with silver handles are placed on a white background, each labeled with a weight of 22.5 kilograms.
22.5kg Rubber Hex Dumbbells (Pair)
Product Code:

125347

Price: $168.75
- +
$168.75
Someone wearing the Kettlebell Wrist Guard with a white circular logo grips a black kettlebell against a white background.
Kettlebell Wrist Guard
Product Code:

126034

Price: $5.00
- +
$5.00
A Spud Inc Hooker Straps workout handle with a rope lies on a green carpet.
Spud Inc Little Brother Strap
Product Code:

125532

Price: $65.00
- +
$65.00
ATX® Wall Mounted Knee Raise & Dip attachment in black, featuring padded sections, handles, and angled metal bars to support the legs during workouts—ideal for knee raise exercises.
ATX® Wall Mounted Knee Raise & Dip
Product Code:

124957

Price: $739.00
- +
$739.00