Power Rack 755SD Deluxe with Plate Loaded Lat Tower
The ATX® PRX-750 Power Rack allows you to customise a genuine commercial quality power rack with a growing range of options and attachments. In the past, you were given whatever the manufacturer thought was the best combination. With changing training styles and customer preferences, ATX sells the cage nude with just J-Hooks. This way you can build your rack to your tastes and budget.
ATX® Power Rack 755SD Deluxe with Plate Loaded Lat Tower Key Features
Construction
- Extremely stable thanks to high base weight of 258 kgs (excluding attachments).
- Reinforcement plates at the bottom of the uprights for additional stability improvements.
- 1500 kgs safe working load.
- Free-Standing design with anti-slip feet which can be removed if you want to slide the rack around your gym.
- High-Tensile Strength M20 & M12 (20/12 mm thick) hardware.
- Certified for Commercial Use by European standards – EN 20957 I.II.IV – S.
J-Hooks
The Power Rack comes with a pair of ATX® PRX J-Hooks V 70mm.
Which are manufactured out of 10 mm thick solid steel sheet and feature a 12 mm thick rubber strip for barbell knurling protection.
There are two optional J-Hooks which are compatible with this rack:
ATX® Roller J-Hooks Universal (ATX-FH7-ROL)
ATX® PRX Monolift (ATX-MLIFT-COP)

Short Distance Spacing
The short distance spacing was first put into effect by Westside Barbell owner Louie Simmons.
The 2.5cm spacing is half the length of standard spacing and allowed equipped powerlifting and bench press enthusiasts to minimize the distance lifted between unracking the barbell and the starting position, helping them save that extra bit of energy.
The shorter centre distance between the adjustment positions also allowed the lifters to find the correct height for the safety spotter arms & bars.

Six Post Rack
The main difference between the Deluxe Power Cage and the Regular ATX®PRX-755 is the added rack extension enhances the overall stability without an increase in footprint. However the main purpose of the extension is for plate storage. The ATX-WPP-810 & ATX-WPP-220 Weight Plan Pins (optional) can be configured as you desire. It is also worth noting that the rack extension comes with a straight chin-up bar – it serves as the rear cross section. So you can use it as chin up bar.

Choose your Spotters
Pin Pipe System ATX-PPS-70 ‐ made out of a solid 20 mm thick steel bar and 6 mm thick rubber sleeve. Rated to 600 kgs
Flip Down Spotter Bars ATX-FDSS-70 ‐ Made from thick steel sheets with 12 mm thick rubber strip for barbell protection. Rated to 500kg.
Belt Strap System ATX-STR-X7-70 ‐ Made from 2-ply 70 mm wide nylon strap with thick steel buckles which feature nylon strips for rack paint protection. Rated to 500kg.

Choose your Chin Up Bar
Single Chin Up Bar ATX-PRX-750-PUL-3 ‐ 27 mm grip diameter. Rated to 160 kgs.
Multi-Grip Chin Up Bar ATX-PRX-750-PUL-1 ‐ Six different grip positions. With Fat (42mm) and Regular (27mm grip) thickness. Rated to 160 kgs
Indexing Multi-Grip Chin Up BaráATX-PRX-750-PUL-M ‐ eight adjustment positions and five grip variations allow you to have up to 40 different grip positions. The unique design means it will only take you a few seconds to change the grip width. Rated to 160 kgs.

Upright Configuration
This rack is constructed from a 70 mm x 70 mm steel tube with a 3 mm wall thickness.
The rack uses a mix of high tensile industrial-grade M20 and M12 hardware to keep it in place.
Laser Engraved scaling for easier hole identification.

Lat Pulldown
The ATX® PRX Lat Tower Option offers 1:1 ratio. This means that you don’t lose any weight to the mechanical advantage while lifting.
ATX® ditched the tube construction for the guiderails and instead opted for 20 mm thick hard-chrome coated rods. This provides you with stability and silky smooth movement.
125 kgs weight stack which goes up in 5 kgs increments.
Padded knee locks & rubber footrests for optimal comfort during heavy training.
Heavy-duty dual bearing pulleys for even smoother operation.

Weight Storage
You can attach the weight plate holders straight to the uprighs:
- ATX® Weight Plate Pins 220 mm (ATX-WPP-220)
- ATX® Weight Plate Pins (ATX-WPP-810)
Or to the ATX® 750 Rack Extension (ATX-EXT-PRX-750)

Reviews
There are no reviews yet.