ATX® T-Bar Row Attachment

ATX®
$155.00
Item No: ATX-OP-TBC

8 in stock

DESCRIPTION

Weight

Weight

The base weight of the item, without any packaging.

11 kg
Dimensions 31 × 26 × 10 cm
Weight

Weight

The base weight of the item, without any packaging.

10kg

Weight Load Capacity

Weight Load

This is the safe working load of the item, not to be confused with a breaking point.

300kg

Inclusions

Inclusions

These are the specific items that you will receive when you purchase the product. Some products are shown with items that are not included for demonstration purposes.

Sold Individually

Warranty

5-Years T&C's

The ATX T-Bar Row Attachment adds a functional T-bar row to a suitable power rack, smith machine or multi-gym. The docking attachment clamps to a square cross-member measuring 50-80 mm, so check your mounting point before fitting it.

The Row Attachment consists of a rowing handle and a docking attachment for your Olympic or Standard barbell. Both are designed for use with 30 mm and 50 mm bars, giving you a practical way to turn your existing barbell into a T-bar row setup.

Existing demonstration featuring the older Barbarian Line T-Bar Row Attachment BB-9053 with Lee Priest.

Key Features:

ATX T-bar row handle and docking clamp

Handle and Docking Attachment

A rowing handle and pivoting barbell docking attachment in one set.

Docking clamp fitted to a rack cross member

50-80 mm Frame Fit

Clamps to square tubing with a cross-section of 50-80 mm.

Double pivot docking clamp with two barbell sockets

Double-Joint Movement

A double-joint design provides movement at the docking point.

Angled rowing handle with locking screw and insert

30 mm and 50 mm Bars

The handle and docking attachment support standard and Olympic bar sizes.

Rowing handle secured around a barbell sleeve

Knurled Rowing Grip

Textured grips can be used with chalk for your heavier rows.

Loaded barbell and rowing handle fitted to a rack

300 kg Load Capacity

The attachment is rated for loads of up to 300 kg.

Dimensions and Compatibility

  • Rowing grip width: 450 mm / 45 cm.
  • Compatible bar sizes: 30 mm and 50 mm.
  • Suitable mounting member: square tubing with a 50-80 mm cross-section.
  • Maximum attachment load capacity: 300 kg.
  • Product weight: 10 kg as listed by Sam’s Fitness.
  • Colour: black.

The 50-80 mm measurement describes the compatible mounting tube, not the attachment’s overall dimensions. Check the mounting position and the load limits of your rack and barbell before use.

Angled rowing handle with locking screw and insert

Fit It to Your Existing Setup

The attachment is intended for suitable ATX Power Cages, smith machines and Multi Squat Racks. Sam’s has also fitted it to Powertec LeverGym and Multi System models, plus the Ironmaster IM2000 and IM1500. These are previous fitment examples, not a guarantee that every model or revision will fit.

If you want to enjoy a functional T-bar row, Sam’s has also used a weight rack with a barbell holder as a mounting setup. Whatever the setup, check for a suitable 50-80 mm square mounting member, secure clamping and enough clearance for the movement.

A Grip Built for T-Bar Rows

The use of knurled grips instead of rubber ones allows you to chalk your hands and grip some serious weight. It may only be an attachment, but it is designed to handle up to 300 kg.

The angled handle has a 450 mm grip width, giving you room to find a comfortable rowing position. Vary your grip and setup to suit your training rather than relying on one fixed hand position.

Additional Information

  • Included: 1 x ATX T-Bar Row Attachment set (ATX-OP-TBC), comprising the rowing handle and docking attachment, with assembly instructions. Sold individually as one set.
  • Not included: Barbell, weight plates, power rack, smith machine, multi-gym or other supporting equipment shown in the photos.
  • Delivery state: Supplied disassembled with assembly instructions.
  • Fitting: Secured using the locking-screw arrangement. Check the mounting tube and bar size before use.
  • Load rating: Up to 300 kg for the attachment. This does not increase the permitted load of your supporting equipment or barbell.
  • Optional items: Pictures may show accessories or equipment which are not included. These illustrate possible configurations or use.

Key Takeaways

  • Rowing handle plus docking attachment for standard and Olympic bars.
  • Fits 30 mm and 50 mm bar sizes and suitable 50-80 mm square mounting tubing.
  • 450 mm grip width with knurled angled handles.
  • 300 kg attachment load capacity.
  • One attachment set supplied; barbell, plates and supporting equipment sold separately.

CUSTOMER REVIEWS

Reviews

There are no reviews yet.

Be the first to review “ATX® T-Bar Row Attachment”
© 2005 – 2026 Sam's Fitness - Equipment for Life All Rights Reserved.
Your Cart
Your cart is emptyReturn to Shop