“ATX® Dip Bar Foldable” has been added to your cart. View cart

Wall-mounted ATX gym rack with an adjustable pull-up bar, functional trainer arm, and a fold-out landmine attachment.

Vertical black steel rig upright with a series of adjustment holes and two ATX branded attachments.

Black upright rack post with numbered height markers and an ATX-branded horizontal attachment secured with bolts.

Black steel ATX rack upright with an attached horizontal wall bracket and numbered height adjustment holes.

Two black upright steel posts for a power rack with mounting brackets and ATX branding.

ATX Power Rack Attachment Upright

Write a Review

$195.00

Item No: ATX-MUR-700

Available approx. 12/11/2026.
• Pre-order • Ships separately • Cannot be combined with other items

No longer available for pre-ordering

DESCRIPTION

Weight Weight The base weight of the item, without any packaging.	13.75 kg
Footprint Footprint This is the area occupied by the item itself. You might need to allocate additional space for the use.	160 mm x 360 mm
Height	1990 mm
Certification	EN 20957 I.II.IV – S
Upright	70 x 70 x 2 mm, hole grid: bore Ø 21 mm, center distance 5 cm

The ATX Power Rack Attachment Upright will let you experience their great range of accessories without even owning a power cage! Or you might already own an ATX Power Rack and want to keep your favourites set up permanently. This simple wall mounted upright combined with attachments can open so many quality exercises. While taking up minimal space and a fraction of the cost of dedicated machines.

For personal trainers or gyms that offer group weight training this will be well worth a look. You could potentially have multiple chin up, dip station and belt squat machines lined down your wall. Even mounting the Lateral Raise Attachment alone would be a great addition to a gym. Stand alone versions cost thousands!

Key Features:

Close-up of the wall bracket and laser-numbered upright on the ATX® Multi Upright / Training Wall Post, with bolts through the hole pattern.

Solid Wall Mounting

Solid 70 x 70 x 2mm steel tube bolts straight to your wall (four wall anchors needed, sold separately), with laser-etched numbers so you can set and repeat attachment heights in seconds.

Close-up of the ATX® floor foot and lower wall bracket on the ATX® Multi Upright / Training Wall Post.

Planted Foot, Tough Bolts

A rubberised ATX® foot and M20 bolts hold the post firmly at both ends, so there’s no wobble to think about between sets.

ATX® Multi Upright / Training Wall Post shown with a pull-up arm, lever arm attachment and a plate-loaded lower arm mounted on it (attachments and plates sold separately).

One Post, Many Options

Add a pull-up bar, belt squat, jammer arms, dip bars, a neck trainer and more from the ATX® range, and grow one post into a full multi-station.

Wall-mounted vertical upright gym rack post with a series of numbered adjustment holes.

Technical diagram of two upright steel rig posts with brackets, labeled with dimensions in millimeters.

Features:

70 × 70 × 2 mm profile steel upright so you get a solid modular post without a full rack footprint.
1990 mm total height so it fits under most standard ceilings where taller racks won’t.
4-sided hole pattern (Ø 21 mm holes, 50 mm centres) with lasered numbers for quick, repeatable attachment placement.
Wall-bolt mount (4 anchors required, not included) so it stays fixed in a small space instead of freestanding.
EN 20957 I.II.IV Class S certification for studio or serious home use.
Modular ATX attachment system so you can add pull-up bars, belt squat, neck trainer, dips, jammer arms, mobility roller and more as needed.
Rubber foot plus M20 bolts for a secure wall fix that doesn’t rock.
Fine-structure powder-coated black finish.
Only 13.75 kg and ships disassembled with instructions for straightforward install.

Wall-mounted ATX squat rack with a pull-up bar, accompanied by a weight rack holding several pairs of dumbbells and weight plates.

Wall-mounted ATX gym squat rack rig with adjustable safety bar attachments.

Wall-mounted ATX gym rig with a pull-up bar and dip attachment holding a weight plate.

Black dip bar attachment mounted to a vertical upright rig post.

Wall-mounted squat rack with an attached pull-up bar and weight bench, next to a two-tier rack holding various ATX dumbbells.

Frequently Asked Questions:

Will the ATX Multi Upright fit under a 2100 mm ceiling?

Yes it will! The upright is 199cm tall, which means that not only it will fit, you will also be able to use the attachments comfortably.

What attachments fit the ATX-MUR-700?

Right now, you can attach a Belt Squat Attachment, Lateral Raise Attachment, Folding Dip Bars, Adjustable Folding Dip Bars, Mobility Roller, Weight Plate Holders, Neck Trainer, Bridge Supporting Pad, Wrist Roller, Split Squat Leg Roller, Landmine Attachment and even Jammer Arms (you will need 2 x uprights for jammers to work).

Do I need to supply my own wall anchors?

The wall anchors are not included, the type you need will depend on the surface you are planning on mounting the Multi Upright to.

Is the Multi Upright studio-rated?

It is certified for commercial use and would do great in a studio setting.

Please note: ATX Power Rack Attachments shown in product images, weight plates and any other accessories are NOT included and are sold separately.