ATX® Half Rack

ATX®
$595.00
Item No: ATX-HRX-620

Out of stock

Notify me when back in stock.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

DESCRIPTION

Weight

Weight

The base weight of the item, without any packaging.

44 kg
Dimensions 206 × 40 × 40 cm
Footprint

Footprint

This is the area occupied by the item itself. You might need to allocate additional space for the use.

121 x 135cm

Height

210cm

Weight

Weight

The base weight of the item, without any packaging.

41kg

Rack Load Capacity

400kg

Hole Spacing

50mm

Frame

60x60x2mm

Certification

EN 20957 I.II.IV – H

Rack Warranty

5 years see T&Cs

Being Sydney based, we get many a customer walking in the door and their expression goes from amazement to sadness. We have some impressive cages on display, but they are too big for a lot of Sydney’s shrinking home gyms. So it is extremely satisfying to see the smile back on their dial when we show them the ATX Half Rack. Their home training dream is now a reality.

The ATX Half Rack 620 combines a 400 kg rack load capacity with a compact 121 cm wide x 135 cm deep footprint. J-hooks, spotter arms and a multi-grip chin-up bar are included.

Key Features:

ATX HRX-620 half rack with J-hooks and spotter arms

Compact footprint

Only 135 cm deep for free weight training where space is tight.

Upright adjustment holes and height alignment marks

35 adjustment positions

50 mm hole spacing and alignment marks help you set both sides evenly.

J-hook mounted on the rack upright

J-hooks included

Includes one pair of ATX J-Hooks – 600 Type 5.

Optional loaded barbell resting on a J-hook

Adjustable barbell support

Set the J-hooks to suit squats and presses using the upright hole pattern.

Lower upright reinforcement bracket

60 x 60 x 2 mm steel frame

Structural steel tubing and lower reinforcement brackets support the rack.

Bolted rack base joint

Bolted base joints

Reinforcement brackets at the base connect the uprights and feet.

Rubber protective foot on the rack base

Rubber protective feet

Rubber feet help protect the floor and resist slipping.

Upper frame reinforcement bracket

Upper reinforcement brackets

Braced upper corners reinforce the connection to the crossmember.

Multi-grip chin-up bar

Multi-grip chin-up bar

Wide neutral close and angled grips add variety to chin-up training.

Dimensions

Width: 121 cm. Depth: 135 cm. Height: 210 cm. Net weight: 41 kg. Barbell support width: 120 cm.

ATX HRX-620 frame construction sketch
ATX HRX-620 dimension drawing showing width depth and height

Compact Half Rack

We are seeing an increasing demand for quality solutions to space constraints in home gyms. So a high quality and safe free weight training system like the ATX Half Rack is rapidly growing in popularity. You can hide one of these up in the back of your garage, or corner of a spare room and still get a quality free weight workout.

The more you learn about weight training, the more you realise how simple it is. If you work hard on your compound movements like bench press, squats, chin-ups and rows/deadlifts you are going to build strength and size.

But if you are training in a gym where there is more talk than lifting, you might be struggling to do these essential movements. So having the ability to perform these in the comfort and convenience of your own home is a massive bonus. You can stick to a program where you progress in weight, focus on lifting heavier without having to rush through your workout.

ATX HRX-620 half rack with optional barbell and plates
Shown with optional barbell and weight plates. These are sold separately.

Take it up a notch!

The best part of the ATX Half Rack is that if you want to add variety to your compound training you can add the Lat Tower Option (which is sold separately). This bolts straight up to the rack and will allow you to do all manner of cable exercises like lat pulldowns, seated rows, tricep press downs, cable curls and many more. With this addition, your Half Rack becomes a versatile compact free weight training system!

The optional lat tower adds cable exercises alongside your barbell training. As with the rack, choose the load and setup to suit the exercise.

Finally, if you want to add a dip option, the ATX-DIP-RX-600 (sold separately) works a treat on the ATX Rack. So along with the chin-up bar which comes standard, you can have a great bodyweight workout too!

Half rack with optional lat tower bench barbell and plates
Shown with optional accessories. Lat tower bench barbell and weights are sold separately.

Additional Information

  • Product code: ATX-HRX-620. ATX 600 Series.
  • Rack load capacity: 400 kg. This is the rack rating and is not a separately verified rating for each attachment.
  • Frame: 60 x 60 x 2 mm structural steel tube with a fine-textured black powder-coated finish.
  • Adjustment pattern: 35 positions with 21 mm diameter holes at 50 mm centres and alignment marks on the front and rear.
  • Certification: EN 20957 I.II.IV – H (Home).
  • Included: one ATX Half Rack 620 with integrated multi-grip chin-up bar plus one pair of J-Hooks – 600 Type 5 (ATX-FH-T5-600) and one pair of Safety Spotter Arms – 50 – Series 600 (ATX-SB-50-0600).
  • Delivery: supplied disassembled with assembly instructions.
  • Not included: barbell weight plates bench lat tower dip attachment and other pictured accessories. These are sold separately.

Key Takeaways

  • A compact home rack with a 121 x 135 cm footprint and 210 cm height.
  • 400 kg rack load capacity with 60 x 60 x 2 mm steel tubing.
  • J-hooks spotter arms and a multi-grip chin-up bar are included.
  • Optional attachments let you expand your training setup.

CUSTOMER REVIEWS

Reviews

There are no reviews yet.

Be the first to review “ATX® Half Rack”
© 2005 – 2026 Sam's Fitness - Equipment for Life All Rights Reserved.
Your Cart
A close-up of a padded black leg roller attachment mounted on the end of a workout bench, with the bench shown in grayscale and partially faded in the background.
Ironmaster Nordic Curl Attachment
Product Code:

126134

Price: $115.00
- +
$115.00
A shiny, silver Standard Kettlebell Locking Screw features a metal cylindrical body with a threaded vertical rod atop a flat, circular base with textured edges for grip.
Standard Kettlebell Locking Screw
Product Code:

124382

Price: $45.00
- +
$45.00
Ironmaster Olympic sleeve set for adjustable weights
Ironmaster Olympic Sleeve Set
Product Code:

124361

Price: $145.00
- +
$145.00
The Ironmaster Quick Lock Mace Handle consists of a square metal backplate with a central hole from which a long cylindrical metallic rod extends horizontally, all set against a plain white background.
Ironmaster Quick Lock Mace Handle
Product Code:

124371

Price: $235.00
- +
$235.00
Black ATX® Belt Squat Attachment for a power rack, featuring a horizontal barbell sleeve and adjustable settings.
ATX® Belt Squat Attachment
Product Code:

124923

Price: $539.00
- +
$539.00